Recent Builds

My horizontal volute spring suspended tank series can master any battle scenario, comes in these builds for any era (except WW1).   Read More

A not very well made T-72B3, ERA works.

A leopard tank that i tried to make as best as possible, it is what it is i suppose.

A heavy infantry tank based on the A69 Victor Cruiser Tank chassis. Capable of mounting a wide variety of guns, from the QF 2 pounder to a shortened QF 3.7 Inch AA gun.   Read More

A Interwar Tank with 8 tons

Germany Railway Cannon!!!!!! I don't know real thickness,so its thickness is default size. In the latter half of the 1930s, the Wehrmacht, which had abrogated the military restrictions of the Treaty of Versailles in its rearmament declaration, commissioned Krupp, an excellent munitions company, to develop and manufacture a new type of train gun capable of attacking the Maginot fortress line built on the French border. The 80cm train gun was completed as part of this project. The two guns produced were named "Gustav" and "Dora" after Gustav Krupp, the chairman of Krupp at the time, and Mrs. Dora Muller, the wife of Erich Muller, the chief designer of the guns.   Read More

A gun mounted on the battleship Yamato. In the Navy at the time, it was called the Type 94 40 cm gun for reasons of confidentiality. The main gun weighs approximately 2,800 tons, which is equivalent to the total weight of all the main guns of the Kongo class battleship. The special wheel technology used to rotate the gun is utilized in the rotating observation restaurant at the Hotel New Otani Tokyo in Kioicho, Chiyoda-ku, Tokyo. 大日本帝国万歳!天皇陛下万歳!敵の潜水艦を発見!駄目だ!   Read More

The Valkyrie Motoworks' belated attempt at a TEABAG-1 competition tank.

My take on one of the most iconic tanks in history, by far one of my best builds ever. Historically accurate in several departments. Top speed is 45 km/h in latewar, Firepower is accurate, Not only in caliber, but shell length too. Armor values are correct too. And since this is the 1944 model, the Turret Roof is 40mm. Requires no cheats. Weight is also spot on accurate, 57 tons.   Read More

Entry for T.E.A.B.A.G. 2

My replica of the VK 45.02 (P) Ausf. B - the rear-mounted turret variant of the two Porsche's unsuccessful designs for a heavy tank project which would become the Tiger II. The build incorporates a production turret, a blueprint armor layout, and the intended 88mm KwK 43 L/71 cannon.   Read More

this is just an excuse to use a rounded turret generator thing i found lmao. 115mm main gun, 45°/s turret traverse, realistic-ish top speed (i think) tried to add little details and make it as realistic as i could, tried my best. hope you enjoy it if you download!   Read More

https://www.reddit.com/r/SprocketTankDesign/comments/qd9j7b/presenting_the_valkyrie_motorworks_a70_project/

The medium class 15t tank -- Kan-anak Zanka 3 "Sanglavaz" was designed to defend the frontline and destroy the enemy tank. Equipped with reliable sloped armour in front to protect incoming, 90mm anti-tank gun with 5 seconds reload time make it to penetrate enemies and fast mobility to redeploy position. the mostly weaknesses on hulldown, side, and rear. you can penetrate those parts with any 20mm gun.   Read More

My replica for the VK 30.01 (P), which was the designation for a 30-ton German heavy tank prototype proposed by Porsche. 2 prototypes were produced, and the project was further developed into the VK 45.01 Tiger (P)   Read More

Here is my Leo 2A4 I used FriskyJingles' base design of the Leo 2AV to make the later production 2A4. So full credit to him for the basis for this vehicle. Here is the video from my channel going over this tank and also his Leo 2AV if you make content using mine please credit him as well! https://www.youtube.com/watch?v=CBv5TtxVkE8   Read More

A pack of 7 different tanks. Very mobile, with top speeds around 50 kmph (31 mph) and fast acceleration. Main armament consists out of a 75mm gun with 180mm-190mm of pen and a 4 second reload. The armor isn't very good, but you can occasionally bounce a shot due to the extreme slopes on the turret and hull.   Read More

This was an attempt to make modern MBTs similar to the Soviet T-72. In this parallel universe, East Germany developed its own tank series based on the Cold War Soviet doctrine and made a few adjustments.... Alright I can't make the lore up seriously. The light variant was to imitate the appearance of T-72, but the era limit doesn't allow composite, so the RHA is significantly thinner than that of T-72 (frontal 200mm). The heavy variant has some good armor upgrades (frontal 350mm, turret 470mm) but with speed/mobility trade-offs due to its heavier weight. Others include exposed barrel/ERA packs and a 120/125mm gun that could penetrate ~220mm of RHA with a depression of 11 degrees. Top speed exceeds 45 kph and even for the heavy variant might still hit 50kph in late war scenarios   Read More

The export (nerfed) version of the original one.

a 5 tons interwar tank as regular and rapid fire variant

SU-85 replica, tryed to copy from War Thunder. Additional info gathered from Wikipedia

My attempt at recreating the Japanese Type 97 Chi-Ha Kai (improved) or Shinhoto (new turret) with the larger turret and upgraded gun. The gun was upgraded from a 57mm low velocity infantry support gun to a 47mm higher velocity gun, giving it more of a chance against Allied and Soviet tanks.   Read More

A pack of 12 fictional tanks from WW1 era to Late War Era. Includes 3 light tanks, 3 tank destroyers, 3 medium tanks, and 3 heavy tanks.   Read More

My attempt at recreating the Marmon-Herrington CTMS. With a 37mm gun, 13mm of armour all around, and plagued by technical problems in US Army testing, it's considered one of the worst tanks of its time.   Read More

the armour, speed, reloading speed are 99% accurate but because to achieve the 13km/h i had to mess with the engine it has 2 reverse gears (the real tank has 1) and yea, i the rpm and engine stats arent 100% accurate, but the speed is   Read More

Italian heavy tank

My replica for the IS-4, also known as the Object 701 which saw a limited production of fewer than 250 vehicles in 1946.

Close approximation to a Leman Russ. Had to lengthen the main cannon considerably to improve armour penetration (~184mm in current patch)   Read More

A very early tank I build, its a 10 tons WWI tank with 31mm penetration - 30mm armor - 8,5 hm/h speed.   Read More

On the thirteenth of April, 1942, OCM 18059 officially recommended the standardization of the heavy tank prototypes T1E2 and T1E3. The standardization of the tanks was approved on the 26th of May, and the two vehicles were designated M6 and M6A1 respectively. Unfortunately the design was outdated even before it's standardization, and would later provide the stepping stone for the new T29 Heavy Tank program.   Read More

WW1 tank just under 15 tons. Easily defeats trenches and can climb 25 degree slopes but max speed of 6.3 mph. Has enough armor to be generally immune to other tanks and line-of-sight artillery of WW1 era and its 45 mm cannon with 100 rounds is more then enough to defeat all comers.   Read More

Made a late war Soviet style heavy breaktrough tank. - 130mm Gun (160mm penetration, 8.3s reload) - 14.7 hp/t - Armour F/S/R: 140/100/75mm    Read More

The Meihoff Corps Model 2 Heavy is the Midwar upgrade of the earlier Model 2 MBT. Essentially an up-armoured M2 with a better engine and a bigger gun, these small upgrades go a long way, dramatically increasing both manoeuvrability and survivability, as well as the increased firepower of the new 55mm gun, boasting a penetration of 97.8mm. While the new spaced armour can be cumbersome, impeding movement on rougher terrain, it can easily be removed in rougher environments and does a lot to protect the vehicle.   Read More

The Meihoff Corps Model 2 Main Battle Tank is a 24t Earlywar design. With a top speed of 26.5km/h (16.5mph), max slope just under 25°, and a decently powerful 30mmx0.6m gun (686m/s muzzle vel., 58.9mm penetration, 2 second reload), the M2 might not be able to outgun its opponents, but can reliably outmanoeuvre them.   Read More

Introducing the Meihoff Corps Model 3 MBT, or the M3. Below 100t (just), this is the first vehicle in the Meihoff Corps' arsenal able to withstand the Taiga scenario. While the tracks are rather fragile (a weakness the AI absolutely loves to exploit, sadly) the armour is more than thick enough to withstand anything thrown at it, the 75mm turret has nice traverse rates, a 6 second reload, and can one-shot a Centurion* with its muzzle velocity of 964.5m/s and penetration of 168.9mm. The M3 has a top speed of 27.8km/h (17.3mph), can climb 15° slopes from a standstill and has twin transmission for tighter turns. As stated earlier, the M3's main weakness lies in its tracks. To keep the weight below 100t, the tracks were made thinner, both in thickness and width. Fitting thicker tracks may increase survivability, but this is untested. Furthermore, the armour skirts can impede movement on rougher terrain, but these can be removed for more rugged operations. *Provided you hit the turret or the rear end. The front armour on a Centurion is pretty good.   Read More

This is an improvement made from the Mark 69 offender. Yes, an improvement that brought like 6969696969696969 times more cursery. I posted this in cursed design and I was told that it is not ok. THEREFORE, DOWNLOAD THIS FOR FUN!   Read More

My replica of the famous M4A3E8 -nicknamed the "Easy Eight". This is one of the most mass-produced modifications of the main U.S. armored vehicle of the World War II   Read More

Most likely the lightest playable tank made yet. The "Kampfpanzer 0 Biene" (eng. Bee) only weights 2 tons, got a max speed of 48 km/h and an penetration of 30mm. Weight: 2 tons Speed: 48 km/h Penetration: 30mm Armor: none   Read More

It's a main battle tank with a load of ERA and a 5s reload 120mm main gun.

That's my vision, if germans captured IS and modified it. 12.8cm gun, HL230, german-type suspension

Perspective agile german tank destroyer that was never built.

Main gun 125mm, fron armor protection 250+mm, 52tons, and top speed 51km/hr

An medium 15 tons WWi turreted tank. Inc tankhunter version. 15 - tons 40mm - armor 31mm - penetration 10 km/h - speed    Read More

A Midwar-Latewar tank line-up inspired by real soviet tanks. The BM5 is similar to a T34-76 while the BM5 is the T34-57. For balancing reasons, I put both of them in Midwar. The BM6 is based on the IS4 tank with a more maneuverable 86mm gun.   Read More

The absolute last thing you would want to get penetrated by on the battlefield

Tired of trying to find the perfect angle to bounce off ennemy shells? Tired of shells damaging your beautiful tank as they comme crashing its armor? Worry no more as this tank comme with overly slopped AND thick armor ! Both upper and lower glacis are 150mm slopped at 70°! Shoulders are 150mm at 70° on both front AND rear! Upper sides are 150mm at 50° and lower sides are another 150mm at 40°! Upper rear is 100mm at 40° while lower rear is 100mm at 30° Turret front is 280mm at 50° Turret cheeks are 250mm at 40° Turret sides are 250mm at 30° and rear cheeks are 200mm at 20° Finally, turret rear is 120mm at 30° Unfortunately, all that not at all excessive slopping didn't left much space for an engine, which only makes 900HP for 109t.... But who needs mobility when you are armed with a 130mm gun that punch through 242mm of armor? (loading process takes 18s) Added 2 rear facing fixed machineguns on the turret, I swear it's a good idea!   Read More

A soviet inspired late war light tank, with around 70mm of effective armor and some slopping, armed with a 57mm gun punching through 145mm of armor. Will reach 50 kph without issues, top speed around 58 kph.   Read More

After seeing suggestions from the discord server, I've made several more improvements based on the version that I released. 1, now the ERA is panneled, which gives a much better looking, with the ERA being enhanced to three plates of ERAs. 2, now the turret armor is improved. Front and cheek armor are now 300mm thick, which means except nanmm pen nothing is going to pen this, as far as I can see now the highest pen is 277mm, which is file edited, and it does not pen this. 3, I kept one of the most important characteristics of the tank, which is it's weight. The weight was kept under 50 tons, so that in late war scenario you get a AI teammate. Just to make sure that when you are playing, turn your era to Late War, because that's the era Im designing this tank in.   Read More

A fiktive Albanian medium great war tank. Tons: 8 Armor: 30mm Pen: 30mm

A midwar medium tank below 30t, very loosely based on the T-43, sporting around 150mm of effective fontal armor as well as an 85mm able to punch through 150mm of armor. Side armor is 60mm on both hull and turret and rear armor is 30/40mm. It's powered by a 492HP V12, giving it solid mobility.   Read More